LINER COMBOS

LIDS & GASKETS

We classified our lids in Milking and Transport Lids: Your milking machine comes with a Milking Lid with 2 or 3 entrances for the air hose and milk hose. Once you finish milking you can remove the Milking Lid and put on your Transport Lid. Leaving the milking lid on while you are transporting the milk can cause spills and can be contaminated because particles of dust can get into the holes on the lid.

Transport Lids are very practical in keeping your milk clean, fresh  with the best quality. Avoid contamination of dust, grass or dirt putting on your transport lid.

Always we try to get our customers the best advice!

Happy Milking!

LID & GASKET COMBOS

We have put together spare parts that complement each other to offer more savings.

When you buy in combos you save more!

SHELL COMBOS

SHELLS

Designed for all goat and sheep breeds. The clear shell allows the milker a view of the milk flow and teat placement while in use. High quality and long lasting. Our clear goat shells fits goat and sheep liners Tulsan, Melasty and other brand names.

HOSES

Melasty milk hoses have been designed to transport the milk to the tank in the most efficient way, giving you the best quality to last longer.  The bigger the inside diameter will increase the flow faster to the bucket . You will be able to find different milk tubes and probably this could be confusing.

How do you know what kind of milk hose you will need?  The answer is very simple. This will depend in the capacity of your bucket. If you have a machine with a bucket size of 6 gallons then you should be purchasing Part No. 3434.

If your machine has a 8 gallon or higher capacity  bucket then the hose that you need is Part No. 3442.

It is very important to pay attention in the outside diameter of your milking claw too.

If you are milking goats we really recommend Part No. 3445 because you can save some money buying the milk hose that comes attached to the pulsator hose.

The pulsator hose is universal, and will fit any kind of milking machine. Part No. 3271

If you have any questions you are welcome to call for an advise!

PULSATORS

A pulsator is  a device that stimulates rhythmic motion of a body.  Melasty pulsators are programmed to milk the animals with the perfect motion to extract the milk in the most efficient way taking care of the animal udder health.

The ratio in the pulsator is 60/40. “Ratio” is the effort of squeeze that the pulsator will perform in the front and back teats, 40% is for the front, 60% for the back; so when,  milking the machine puts 40% of its effort in to the front half, and 60% into the back half. (there is more milk in the hind quarters)

Pulsator speed is the pulsations (squeezes) per min. Your pulsator needs to be pulsating 60 times in 1 minute or 15 times in 15 seconds. The lower the number the longer the squeeze, this pushes the fluids in the teat tissue back up and is called the rest phase.
The higher the number the more shorter duration squeezes and suction phases there are. People can milk a cow on anything from 50 ppm to 80 ppm. Most people set the machine on 60 ppm.

When Milking Goats the ratio is 60/40 but the ppm changes. Your pulsator needs to be pulsating 23 times in 15 seconds.

PALLETS

Your Milking Machine works with graphite or fiber pallets/Vanes. What are  pallets or vanes  when we are talking about milking?

When you open your vacuum pump you will be able to see a cylinder with holes in the middle. In the holes we insert graphite/vanes and are responsible to cause the vacuum inside of your  vacuum pump.

How often do you need to replace them? All depends in how often you are milking. The life expectancy is 1 year. If you are transporting your milking machine be sure to take them out because with the vibration they may break.

Please go to our You Tube Channel Mitty Supply and learn everything about your vacuum pump and how to install your graphite pallets when is time for a tune up!.

HOSE COMBOS

Always try to keep extra spare parts available, they become handy when you must need them.

COMPLETE GOAT CLUSTER

MILKING CLAWS

Melasty valves shutoff  automatically and controls the vacuum supply to each liner during both milking and washing. The valve opens automatically when the teat enters the liner and closes when the teat is removed. Save money buying the part that you need on your goat milking cluster. You can find the complete goat milker valve or only the gasket, upper nut or lower nut. If you have any question give us a call!

MILKING CLAW COMBOS

We have put together spare parts that complement each other to offer more savings.

When you buy in combos you save more!

BUCKETS WITH LIDS

Heavy Duty stainless steel 18/100 Inox resist corrosion in nearly every possible environment. You can use them for milk, wine, coffee, oil, tea.

We offer Free Shipping in USA!

BUCKETS WITHOUT LIDS

Each milk pail is built with quality workmanship, and designed for easy transportation. Heavy Duty stainless steel 18/100 Inox resist corrosion in nearly every possible environment.

You can use them for milk, wine, coffee, oil, tea.

We offer Free Shipping in USA!

OTHER PARTS

Melasty offers a wide variety in spare parts for your milking machine. Vacuum regulator, cleaning brush sets, vacuum gauge, automatic water bowls, muffler, air valves, mastitis detector, blind plugs, milk stoppers. Take a look and you will find so many practical parts that you can replace and use. If you have any questions let us know!

AIR TUBES

Air tubes are classified in long and short: The short tubes are the ones that we use to connect them to the cow or goat shells to canalize the vacuum air to the liners. The long air tubes/hoses like the pulsator hose or air hose are specifically to canalize the vacuum air to the bucket and the milking claw.

VACUUM PUMPS

Melasty offers 2 different kinds of milking vacuum pumps. 70mm and 80mm. The pumps are compatibles with Tulsan Milking Machines.

Time to replace your vacuum pump?

Review the brand name and machine model that you have in order to fit a match. If you have any questions please call. (912) 339-0173.

COVERS

It is very important to keep your machine clean and in good standing when is time to start milking. We have customized covers for Melasty milking machine models TCK1-PS, TEK1-PS, TJK1-PS, TK1-PS, TK2-PS, TK2-2PS, TEK1-PS, TJKKC2-PS, TKKC2-PS, TKKC4-PS, TKKC4-2PS.

Your motor and vacuum pump can get rusty with humidity and dust can ruin them. Extend the life of your machine with a good cover!

MOTORS

The heart of your milking machine is the motor. You need to listen what he says… Is it running smoothly, is it making a weird noise? is it smelling like something is burning?

Keep your motor protected from dust, water and humidity or it will get rusted and then you will be starting with problems.

MILK TUBES

Milking tubes are located at the goat milking cluster connected to the automatic valve to canalize the milk in to the milk hose.

Melasty liners and tubes; are produced under the control of our laboratory and our standardization guarantee. Long lasting and high quality.

CLEANERS